Nationwide Louvre Company have supplied and installed the Louvred Plant Screen below at Gloucester University.
This louvred screen was self supporting and was made using our EL75LS louvre blade and incorporated a louvred double doorset. Unlike many of our other projects the blades were requested in mill finish to match other milled aluminium screens on the site previously supplied by NLC.
Vertical box section blades (R150) were used for the Brise Soleil panels supplied and fitted by Nationwide Louvre Company at this new care centre in Egerton.
NLC recently installed the Brise Soleil on a residential property which is part of an ongoing housing development project at Cotswold Waters in Fairford, Oxfordshire.
All panels are factory fabricated and fitted on site by NLC engineers. These solar shading / Brise Soleil panels were fabricated using our 150mm aluminium elliptical blade and finished in polyester powder coating RAL 7016 Semi-Gloss.
The latest louvre to be installed by NLC was for the Western Village Energy Centre in Edinburgh.
This louvre was fabricated using our NLC-EL75 louvre blade and featured birdmesh to the rear of the louvre and two large double doors.
All materials were finished in 7016 Semi-Gloss polyester powder coating.
The pictures below show a horizontal solar shading project recently supplied and installed by NLC on a residential property in Newport.
The solar shading panels were made using our 150mm wide elliptical blade powder coated in 7022 Matt. This particular project featured 5 fully welded corners to allow the panels to run continuously along the face of the building and around the corner.
These runs of solar shading were used on both the ground and first floor of the building to help prevent solar gain through the large windows featured on the property.
