NLC-SOL120E Horizontal Solar Shading – London

Brise Soleil / Solar Shading – London

NLC recently installed the Brise Soleil on a private residential property in Putney, London after the customer found that the solar gain during the summer months made the kitchen extension unusable. The brackets were fixed directly onto the face of the building with the panels projecting 1000mm from the wall. The panels provided shading to a large dinning area at the rear of the property. All aluminium components that were supplied by NLC were powder coated white to match the windows and render on the building.

Tapering Solar Shading – Southampton

The job shown in the images below is one of NLC’s latest projects. Two vertical brise soleil panels that contain a series of blades that step down equal amounts each time to follow the line of a roof.  The blades are supported by two horizontal box section rails that were pre-loaded with fixed angle brackets at NLC’s factory. The blades were supplied with laser profiled end caps which were polyester powder coated to match the blades and supports.

NLC-EL75LS Aluminium Louvred Plant Screening – Telford, Shropshire

The vertical shading panel on this project acted as a feature over reducing solar gain into the building. NLC’s Shading panels filled in a large empty space above the entrance to the factory / offices and instantly became one of the main focus points of the commercial unit. The large panels (approx 3 meters x 4 meters) were supplied in kit form and assembled / installed between the vertical steelwork columns on site. The Louvre Screen to the side of the building contained 5 No. single louvre doors, each giving access to certain maintenance areas on the plant behind. All items supplied by NLC were polyester powder coated RAL 7016 to match the rest of the building.

Timber Shading – Lifestyle Centre, Oxford 

Another one of Nationwide Louvre Companies recent installations came in the form of a vertical Brise Soleil panel to the entrance of a new Lifestyle / Fitness Centre in Oxford. The panel is constructed from rectangular western red cedar vertical fins fixed to horizontal powder coated aluminium rails fixed back to the curtain walling system. All fixing details were kept to a minimum on this project so when viewed from the external face, no fixing points were visible for the supports or the blades themselves.  The horizontal box sections were supported directly off of the windows with the used of half hidden curtain walling brackets. The curtain walling brackets were installed prior to the capping so that all five fixings per bracket were hidden. The blades were then secured to the box section with folded angle brackets to the rear, again giving a very clean looking appearance when viewed from outside.

Vertical Solar Shading / Brise Soleil

NLC recently completed the installation of the green vertical solar shading fins and the rectangular Western Red Cedar timber Brise Soleil. The green shading fins were supplied in two different depths to suit two different sections of the windows. The blades with shorter depth were used at the edge of the openings which meant the longer blades were fixed in a more central position on the windows. The western red cedar timber brise soleil panels were installed along the south elevation as those windows needed the highest reduction in solar gain. 10mm Thick fully welded aluminium brackets were used to support the vertical panels in front of the windows with a drop rod installed on the largest panel to prevent deflection of the centre of the timber blade.

Aluminium Shading Fins with Timber Effect Finish – London

The latest project to be completed by Nationwide Louvres is the supply, delivery and installation of Timber Effect Brise Soleil to a new residential development in North London. The shading panels were fabricated using rectangular box section support rails & 210mm elliptical blades. Prior to installation the blades were sent to a specialist powder coating company who applied a dark wood effect finish to the blades which gave the aesthetics of wood with the durability of aluminium. The blades stepped down in size to follow the line of the roof and covered one half of the large triangular windows that were the main feature to the living spaces of the new houses. The panels were installed as non-vision panels more so than Brise Soleil but they will still offer a certain of shading in the summer months to that section of window.